From jeff–(at)–fn.org Mon Nov 27 16:55:08 CST 1995
Article: 5851 of alt.guitar.amps
Path: geraldo.cc.utexas.edu!cs.utexas.edu!uwm.edu!news.inc.net!news.uoregon.edu!mars.efn.org!garcia.efn.org!not-for-mail
From: jeff–(at)–fn.org (Jeff Olsen)
Newsgroups: alt.guitar.amps
Subject: Re: Best source of parts for a ’68 Pro Reverb?
Date: 27 Nov 1995 12:13:28 -0800
Organization: Oregon Public Networking
Lines: 23
Message-ID: <49d658$3u--(at)--arcia.efn.org>
References: <49a94n$8s--(at)--urly.cc.utexas.edu>
NNTP-Posting-Host: garcia.efn.org
X-Newsreader: NN version 6.5.0 #7 (NOV)

In <49a94n$8s--(at)--urly.cc.utexas.edu> mi–(at)–ts.cc.utexas.edu (Mic Kaczmarczik) writes:

>Someone I know is restoring a ’68 Pro Reverb (early silverface with
>aluminum trim around the grill). The amp is missing the “Fender”
>script logo on the grill and the jewel for the “on” lamp. Can
>anybody recommend a good place to get these parts?

>Also, the amp is loaded with E-V Force 12 speakers, which obviously
>are not stock. What sort of speakers would it originally have come
>with?

Try Mojo Musical supply; 1-800 927 6656 for the logo and the jewel. If
they don’t sell to callers (IE, only to dealers) I can order it for you
through my work.

Don’t know about the speakers, but I may know someone who’d buy those
Force 12’s from them. It would, in general, have had a low wattage,
paper-cone speaker by Jensen or Utah in it…

I have one. They are KILLER amps. He should look at putting new filter
capacitors in there, and new tubes too…

-jeff

From moskowi–(at)–anix.com Wed Nov 29 08:13:46 CST 1995
Article: 5927 of alt.guitar.amps
Path: geraldo.cc.utexas.edu!cs.utexas.edu!news.sprintlink.net!rockyd!cmcl2!panix!not-for-mail
From: moskowi–(at)–anix.com (Len Moskowitz)
Newsgroups: alt.guitar.amps
Subject: Re: Best source of parts for a ’68 Pro Reverb?
Date: 29 Nov 1995 00:17:51 -0500
Organization: Panix
Lines: 23
Message-ID: <49gqdv$3s--(at)--anix3.panix.com>
References: <49a94n$8s--(at)--urly.cc.utexas.edu>
NNTP-Posting-Host: panix3.panix.com

Mic Kaczmarczik wrote:

>Someone I know is restoring a ’68 Pro Reverb (early silverface with
>aluminum trim around the grill). The amp is missing the “Fender”
>script logo on the grill and the jewel for the “on” lamp. Can
>anybody recommend a good place to get these parts?

Check out the advertisers in Vintage Guitar magazine. The old Fender
logos are not cheap — expect to pay around $50 for them. You can get
the pilot light jewels for around a buck ($1).

>Also, the amp is loaded with E-V Force 12 speakers, which obviously
>are not stock. What sort of speakers would it originally have come
>with?

The ’66 and ’72 Pro Reverbs I have both have Oxfords.

—
Len Moskowitz
Core Sound WWW site: http://www.panix.com/~moskowit
moskowi–(at)–anix.com