From rich–(at)–imeelect.com Mon May 3 11:25:10 CDT 1999
Article: 176475 of alt.guitar.amps
Path: geraldo.cc.utexas.edu!cs.utexas.edu!news-peer1.sprintlink.net!news.sprintlink.net!news-peer.gip.net!news.gsl.net!gip.net!news.voicenet.com!news3.voicenet.com.POSTED!not-for-mail
Message-ID: <372CC806.767--(at)--imeelect.com>
From: Rich Koerner
Reply-To: rich–(at)–imeelect.com
X-Mailer: Mozilla 3.04Gold (Win95; I)
MIME-Version: 1.0
Newsgroups: alt.guitar.amps
Subject: Re: Why carbon comp resistors and cloth wire?
References:
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 27
Date: Sun, 02 May 1999 17:47:50 -0400
NNTP-Posting-Host: 207.103.135.116
X-Trace: news3.voicenet.com 925681474 207.103.135.116 (Sun, 02 May 1999 17:44:34 EDT)
NNTP-Posting-Date: Sun, 02 May 1999 17:44:34 EDT
Xref: geraldo.cc.utexas.edu alt.guitar.amps:176475

jgalt wrote:
>
> Does anyone know why carbon composition resistors are preferred for vintage
> and reproduction amps? I thought metal film resistors are lower noise?

This part I’ll leave for the others in the News Group to respond to.

> I don’t understand how cloth wire effects things either.

Well, the flow of electrons through the wire could care less what
clothes the wire wears.

However, the truth of the matter for Fender’s discontinuation of the
cloth wire in the amplifiers was due to environmental reasons. It was
found that a fungus caused a type of jungle rot of the cloth in the
South American exports. In some of those amplifiers, only the wire
conductor was left of the original amplifiers wiring.

Just one of the Fender moments in history I thought I’d share with the
Group.

Regards,

Rich Koerner,
Time Electronics.

http://www.timeelect.com